220V-240V 3000W Engine heater gas electric parking heater webasto diesel heater Air Parking Car Preheater Heating for 2.5L-6.2L

98% of buyers enjoyed this product!
1050
Ships From:
China Russian Federation
Quantity:
View cart→

 

220V-240V 3000W engine heater gas electric parking heater webasto diesel heater Air Parking Car Preheater Coolant Heating

Product Description:

  • Name:Automotive Engine Coolant Heater European Plug
  • Material:Environmental Aluminum+Environmental PVC
  • Applicable voltage:220V-240V
  • Power:3000W
  • Height*Diameter:20cm(7.9inches)*13cm(5.1inches)
  • Weight:About 1.4KG
  • Automatic Temperature Control:65Celsius-70Celsius
  • Pump Head:Above 90cm
  • Applicable vehicles:Gasoline vehicles, diesel vehicles

Features:

  • Using a new high purity aluminum, fine workmanship, reasonable structure, Seiko to create each component. Exclusive R & D patent heating body, higher thermal conductivity, more smooth cycle
  • The preheater is an international flame retardant power cord with a length of one meter and an internal dual thermostat with automatic reset function

Installation and warning:

  • After installation, must be anti-antifreeze waterway exhaust, so as to avoid air in the antifreeze air resistance, antifreeze does not cycle lead to damage to the preheater

  • Natural heater can not use this preheater, the preheater can only be used for the use of high-quality glycol antifreeze vehicles, low-grade antifreeze will produce scale, rust and ice, plug the preheater.

  • Please use the rated voltage of 220-240V, 10A power socket and can carry the peak power of 16A international three-wire, and a reliable grounding protection power.

The principle of the preheater:

The preheater uses 220 volts to heat the antifreeze. The built-in water pump circulates the antifreeze to heat the engine and raise the temperature of the body to reach the normal starting temperature of the vehicle.
installation method:
The preheater must be installed upright and positioned 20CM to 40CM below the tank lid. Disconnect the warm water return pipe, the return pipe will become 2 cuts, let the water inlet of the preheater be connected to the water pipe on the engine side, and connect the water outlet of the preheater to the pipe on the warm air side. It is the pumping water into the preheater, which is heated by the preheater to the warm air and then returned to the engine, which is opposite to the engine water circulation direction. The parallel installation method recommended by the truck is to take the water from the body to block the small circulation to the return pipe of the warm air and then return to the engine. Must remember to press the exhaust, if you do not vent, it will lead to gas donation. If the water tank is hot, the preheater will dry and must be vented. A good gas can be used to energize the preheater. (After installation, start the vehicle to supply oil, open the water tank cover, some cars will see bubbles coming up or antifreeze drop, fill up antifreeze, multi-cycle for a while, then look at the antifreeze next day, then need to Repeat the work of the previous day, and feel that the exhaust pipe passing through the antifreeze is hot. The exhaust is discharged.) Please go to the formal and experienced repair factory for installation.
Or install antifreeze after installation and drive out for a few kilometers. Pay attention to the engine water temperature when driving. (If the air resistance is too high, it may be high temperature), come back and run for a while, use the preheater the next day, before plugging in. Use a few minutes to touch the surface of the preheater. If it is hot, it is not exhausted. The preheater is dry, immediately power off, and re-vented. If the surface of the preheater is hot after a few minutes of heating but not hot, it is in normal operation:
Preheater heating time:
The preheater is the heating before the vehicle starts. The heating time is normal in winter. It is about 20~40 minutes to reach the temperature at which the vehicle starts. It is about 30 to 50 degrees (equivalent to increase the positive and negative 50). Degree), specific heating time and water temperature after heating, weather, model and other reasons, the weather is cold, the water tank is large, the heating time is long, and the heating time is different in different regions. After several heating, you can find your own vehicle. The heating time, according to the experience to determine the heating time, to avoid heating the people for a long time. Must not be heated for a long time, the thermostat is always activated, the life of the stop is affected, the electrical components have limits that cannot be used illegally, and the temperature control is always heated. The heating time of each temperature is definitely not the same, heating 30 Minutes are only approximate. We can’t experiment with heating time for each type of temperature at each temperature. We will extend or reduce the heating time according to the temperature. We will be optimistic about the installation instructions and precautions.
For the first time after installation, it is necessary to observe whether the preheater itself is hot. If it is hot in a short time, it means that there is no gas in the antifreeze. The antifreeze has no air circulation and can be recycled. If it is heated for a few minutes, it will be hot but not hot. , indicating no problem, normal heating and circulation
When the preheater is heated, the internal temperature reaches 80 degrees to stop heating, the outlet water temperature is about 40 to 50 degrees, and the internal temperature is less than 60 degrees to reheat, so it is not recommended to use the plug for a long time. The frequent operation of the thermostat will affect the thermostat. life. . The built-in water pump is the antifreeze solution responsible for circulating heating. The working principle of the preheater is roughly that the heating body is responsible for heating, the temperature controller is responsible for controlling the heating temperature and stopping the heating, and the water pump is responsible for circulating to ensure uniform heating.

SHIPPING AND DELIVERY

We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:
Location *Estimated Shipping Time
United States 10-20 Business days
Canada, Europe 10-20 Business days
Australia, New Zealand 10-30 Business days
Central & South America 15-30 Business days
Asia 10-20 Business days
Africa 15-45 Business days
*This doesn’t include our 2-5 day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.

My tracking says “no information available at the moment”.

For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

REFUNDS & RETURNS POLICY

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.

Refunds

Your satisfaction is our #1 priority. Therefore, you can request a refund or reshipment for ordered products if:

  • If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.
  • If you received the wrong item you can request a refund or a reshipment.
  • If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.

We do not issue the refund if:

  • Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
  • Your order did not arrive due to exceptional circumstances outside the control of . (i.e. not cleared by customs, delayed by a natural disaster).
  • Other exceptional circumstances outside the control of https://easytoolssupplies.com

*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.

Exchanges

If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorise you to do so.

Shopping cart

×